Bike Rear Rack, Silver Aluminum 3 Leg Rear Bike Rack with spring,Black, reflector INCLUDED, Biria

Buy Cheap Bike Rear Rack, Silver Aluminum 3 Leg Rear Bike Rack with spring,Black, reflector INCLUDED, Biria

Buy Low Price From Here Now
Silver Aluminum 3-leg rear carrier. Alloy 8-inch struts included, adjustable for 24 inch to 700C wheels. Reflector bracket, spring flap, and mini-pump holder. Capacity for 3-leg carrier is 55 lbs. Includes spring retention systems, Reflector included

................................................
For any inquires and customer service before or after your purchase please contact us at bikeandgo@gmail.com. Your satisfaction is our priority
................................................
This rack comes with three sets of screws and two sets of nuts. One set of screws and nuts are for the leg parts of the rack where it is installed and attached to the bicycle. The size of the leg screw is 7/32". Please be advised that these screws will fit most bicycle holes made for rear rack legs. However, due to variety of different bicycle designs, there are bicycles that these screws for rack legs may not fit your bicycle. In this case you may need to purchase additional screws in order to install this rack to your bicycle.
This rear rack comes with screws that have hexagonal sockets in the head. Therefore, you will need an Allen wrench to install this rack.
Readmore

Technical Details

- bikeandgo@gmail.com. Your satisfaction is our priority
- Reflector included. Aluminum Bicycle rear Rack 3-leg, Silver
- Alloy 8-inch struts included, Includes spring retention systems
- bracket, spring flap, and mini-pump holder. Adjustable for 24 to 700C wheels,
- Capacity for 3-leg carrier is 55 lbs.
See more technical details

Images Product

Buy Bike Rear Rack, Silver Aluminum 3 Leg Rear Bike Rack with spring,Black, reflector INCLUDED, Biria Now

Bike Seat Post Rear Rack, Steel MTB rack for seatpost fixation. Silver, Biria, Reflector included

Buy Cheap Bike Seat Post Rear Rack, Steel MTB rack for seatpost fixation. Silver, Biria, Reflector included

Buy Low Price From Here Now
This rack is especially great for mountain bikes with suspension that cannot have conventional rear racks with legs-------------This rack comes with a heavy duty bungee cord strap that stretches full length of the rack-----------In the middle of the rack there is a removable cover to store your mini pump. The mini pump is not included with this rack------------------This rack also has a small compartment and inside of it are tire levers & patches and there is enough room that you can store other small items like your keys and etc...------------------This rack includes a large reflector and can easily carry up to 50 pounds.
Readmore

Technical Details

- MTB rack for seatpost fixation. Silver
- with tool box with patch kit,
- Bike Seat Post Rear Rack, elastic strap.
- space for mini-pump, bungee cord strap that stretches full
- Large Reflector included
See more technical details

 "A GREAT BIKE RACK" 2010-01-09
By Thomas J. Mcnabb
As the title shows,I am very pleased with this purchase. I bought this specifically for my dual purpose mountain bike & needed a seat post mount type of rack to let the suspension work. As to features/extras, comes with a heavy duty bungee cord strap that runs full length of the rack. In the center of the rack running length is a removable cover to gain acess to your mini air pump(not included). My TOPEAK air pump fits here & won't fall out even off road, but rattled some. Fixed that by wrapping a rubber band around handle. In the back is a hinged cover with included tire levers & patches with room to spare. Held a 40 lb cooler of groceries already. Strong seat post mount at front under grey plastic cover. LARGE rear reflector 3 times the size of my old one. Quality product Highly recommended. I'm buying another for my backup bike.


Images Product

Buy Bike Seat Post Rear Rack, Steel MTB rack for seatpost fixation. Silver, Biria, Reflector included Now

Bike Rear Rack, Black , Aluminum 2 Leg Rear Bike Rack with spring, reflector INCLUDED, Biria

Buy Cheap Bike Rear Rack, Black , Aluminum 2 Leg Rear Bike Rack with spring, reflector INCLUDED, Biria

Buy Low Price From Here Now
Aluminum 2-leg or 2-leg rear carrier. Alloy 8-inch struts included, adjustable for 24 to 700C wheels. Reflector bracket, spring flap, and mini-pump holder. Capacity for 2-leg carrier is 50 lbs. Includes spring retention systems, Reflector included
........................................................
This rack comes with two sets of screws and two sets of nuts. One set of screws and nuts are for the leg parts of the rack where it is installed and attached to the bicycle. The size of the leg screw is 7/32". Please be advised that these screws will fit most bicycle holes made for rear rack legs. However, due to variety of different bicycle designs, there are bicycles that these screws for rack legs may not fit your bicycle. In this case you may need to purchase additional screws in order to install this rack to your bicycle.
This rear rack comes with screws that have hexagonal sockets in the head. Therefore, you will need an Allen wrench to install this rack.
Readmore

Technical Details

- Aluminum Bicycle rear Rack 2-leg, Blk
- Capacity for 2-leg carrier is 50 lbs.
- Alloy 8-inch struts included, Reflector bracket, spring flap, and mini-pump holder.
- Adjustable for 24 to 700C wheels, Includes spring retention systems
- Reflector included
See more technical details

 "Great rack with one flaw" 2009-11-21
By J. Madden
I wanted a sturdy trunk rack that would be easy to attach to my bike. I bought this one mainly the price was very good and it appeared to be what I wanted. The instructions left something to be desired, but, with a little basic common sence, one can figure how it attaches to the bike. The primary flaw were the braces that attached to the seat stays, they were too long for my bike and not ajustable. A quick measure and a trip to the local hardware store to buy a small metal brace, that I found in the cabinetry section, a couple of cuts with my Dremil and I had custom fitted braces. Total time to do the whole job 3 hrs and looks great! Am I one of those guys who are handy with tools? No! This was a simple job and I've been happy with everything ever since. All in all its a well made, good sturdy rack.

 "plan for install time and parts" 2009-09-14
By Beth MN
I've had my rack on my new bike for about a month now. The funtionality is fine and the rack is very sturdy. My only complaint (like others before me) is about the installation, the rack comes with no instructions which isn't that much of a problem until you discover that some screws don't fit in some places. The screws included with the rack did not match the size I needed for the pre-tapped holes on my Trek bike. So, just plan on at least one trip to the hardware store and about 10 minutes more than you think it should take for the actual installation.


Images Product

Buy Bike Rear Rack, Black , Aluminum 2 Leg Rear Bike Rack with spring, reflector INCLUDED, Biria Now

Bike Rear Rack, Aluminum 3 Leg Rear Bike Rack with spring,Black, reflector INCLUDED, Biria

Buy Cheap Bike Rear Rack, Aluminum 3 Leg Rear Bike Rack with spring,Black, reflector INCLUDED, Biria

Buy Low Price From Here Now
Aluminum 3-leg rear carrier. Alloy 8-inch struts included, adjustable for 24 inch to 700C wheels. Reflector bracket, spring flap, and mini-pump holder. Capacity for 3-leg carrier is 55 lbs. Includes spring retention systems, Reflector included

................................................
For any inquires and customer service before or after your purchase please contact us at bikeandgo@gmail.com. Your satisfaction is our priority
................................................
This rack comes with three sets of screws and two sets of nuts. One set of screws and nuts are for the leg parts of the rack where it is installed and attached to the bicycle. The size of the leg screw is 7/32". Please be advised that these screws will fit most bicycle holes made for rear rack legs. However, due to variety of different bicycle designs, there are bicycles that these screws for rack legs may not fit your bicycle. In this case you may need to purchase additional screws in order to install this rack to your bicycle.
This rear rack comes with screws that have hexagonal sockets in the head. Therefore, you will need an Allen wrench to install this rack.
Readmore

Technical Details

- For any inquires and customer service before or after your purchase please contact us at bikeandgo@gmail.com. Your satisfaction is our priority
- Reflector included. Aluminum Bicycle rear Rack 3-leg, Blk
- Alloy 8-inch struts included, Includes spring retention systems
- bracket, spring flap, and mini-pump holder. Adjustable for 24 to 700C wheels,
- Capacity for 3-leg carrier is 55 lbs.
See more technical details

 "No problem installation!" 2009-12-10
By Linda J. Searcy (Elk Grove, CA)
First, I think the most important thing in purchasing a new rack for your bike is to VISIT A LOCAL BIKE SHOP and let someone show you which type you will need. That eliminates almost all of your battles when it finally arrives in the mail, all packaged up new! From there, it was easy street for me. I am a single woman and not necessarily mechanically inclined, but I was able to do it on my own in less than an hour. The instructions weren't very helpful, so I had to figure it out on my own. I did have to make a minor adjustment by replacing the bolt at the neck of my frame with another one (that I just happened to have in my toolbox). The total cost saved me $20 or more (with free shipping), it looks great on my pink Schwinn cruiser, and ordering was no-hassel. Love it!

 "DIDN'T FIT MY MOUNTAIN BIKE" 2009-11-08
By M. Yu
This rack only fit single speed bike. It didn't fit my Columbia Trailhead mountain bike.

 "Rear Bike Rack" 2009-10-15
By Bill K. (Dallas, TX)
This rack was easy to install, lightweight, and very handy to use. I bought this mainly to haul groceries with a foldable picnic cooler strapped to the rack with an elastic cargo net. Works great! The rack is very strong and stable, and for the price a very good value.

 "does job well" 2009-09-24
By Aaron C. Croteau (Portland, ME)
This does the job very well. Very sturdy. Adjustability is a good feature. I'm giving it 4 instead of 5 cause it does not look quite as sleek as another rack I've used, but close.

 "Great find if it fits your bike; limited adjustment makes that a gamble" 2009-09-06
By Chapman Flack (Lafayette, IN United States)
This inexpensive, well built rear rack is listed on Steven Scharf's rear rack page and has many features of the better racks found there: three-strut construction, long horizontal dogleg, welded and recessed reflector/taillight mount, even pegs for a frame pump (tips 232mm apart). It has a Pletscher-style mousetrap hold-down that is easily removed if you have no use for it.



Mounting flexibility is where it loses stars. The photo shows that this rack's seatstay braces are made from round tube, just as in the better racks on Scharf's list. But on those other racks, the round-tube braces mount in clamps that give four-way adjustment: reach, drop, width, and seatstay angle. On this rack, they don't--a point that Scharf missed when he reviewed the rack from a photo.



On this rack, the braces are just flattened and drilled at both ends, and can bolt to the rack in your choice of 5 positions fore-and-aft, which gives you some adjustment for reach and drop (but not independently), and nothing for width or stay angle.



The lower mounts at the dropouts are height-adjustable, but only in 3 fixed positions marked 24", 26", and 28", referring apparently to nominal tire diameter. The 2 inch diameter increments should make the height marks 1 inch apart, but they're really 3/4 inch apart. It doesn't make sense, so just pick what fits. :)



The lower mounts come straight vertically down. If you have, say, an aluminum frame with fat seatstays that end at skinny dropouts, this rack won't work and you will need a rack whose lower mounts come in at an angle from the rear. You could spread this rack and mount it with thick spacers, or fabricate new lower mounts, but you'd have to refigure the load capacity and, really, there are other racks that will work without mods.



This is a great rack at a great price if you have a steel frame with tapered seatstays and all the dimensions happen to match the available choices. If not, another rack may work better. These measurements should help you decide before you buy. They're all taken by me, by hand, don't sue me if they're not exact:



Vertical, dropout hole center to underside of platform: 348mm (24" position), 369mm (26" position), 389mm (28" position).



Horizontal, front of platform to projected dropout hole center: 194mm



Front of platform to seatstay brace hole centers: 12mm, 32mm, 47mm, 62mm, 77mm (yes, the first jump is bigger)



Seatstay brace length: 165mm (the braces are bent, but this is the straight-line length between hole centers).



Platform length overall, while we're at it: 375mm


Images Product

Buy Bike Rear Rack, Aluminum 3 Leg Rear Bike Rack with spring,Black, reflector INCLUDED, Biria Now